Composity configurations

On the following pages the measurements of the staircase (footprint) are displayed based on the number of steps and it is possible to determine the direction of ascent, entry and exit, the shape and minimum size of the opening in the floor.
STRAIGHT LINE


Rectilinear scale measurements
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps
WITH 1 ROUND
Scale measurements with 1 turn
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps
WITH 2 TURNS

Scale measurements with 2 turns
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps
DIRECTION OF RISE
Hours
Counterclockwise
LAP POSITION
Down
Intermediate
Up
HOLE DIMENSIONS

If the hole exists: based on the height between the floors (H) to be connected, select from the possible staircase configurations the one compatible with the existing floor hole according to the diagram below.
If the hole still needs to be made: based on the height between the floors (H) to be connected, make the hole in the floor compatible with the configuration of the chosen staircase (straight, with one turn, with two turns) according to the diagram below.

HEIGHT BETWEEN
THE PLANS (H)
DIMENSIONS OF THE SLOT HOLE
(with slab thickness of 30 cm)
Min. 240 cm* - Max. 260 The floor hole must have at least
the dimensions of the scale
Min. 260 cm - Max. 280 The floor hole must have at least
the dimensions of the staircase minus 1 step down
Min. 280 cm - Max.305 The floor hole must have at least
the dimensions of the staircase minus 2 steps at the bottom
Min. 305 cm - Max. 325 The floor hole must have at least
the dimensions of the staircase minus 3 steps at the bottom
Greater than 325 cm The floor hole must have at least
the dimensions of the staircase minus 4 steps at the bottom
* less than 240 cm: The floor opening must have at least the dimensions of the staircase plus 1 step at the top of the staircase (bottom)
HOLE WIDTH: scale width + 5 cm.