The modular open staircase, designed by Giugiaro Architettura, which combines a solid steel structure with the possibility of installing an integrated LED lighting system.

MATERIALS

STEPS

In solid beech wood, 40 mm thick
Without knots and cracks, maximum stability and mechanical resistance thanks to Finger Joint technology
Non-toxic water-based paint: 3 layers of paint

HANDRAIL

In solid beech wood of the same color as the steps

STRUCTURE

Modular steel elements
Matt and scratch-resistant painting, baked with epoxy powders

RAILING (two models)

Vertical columns in painted steel in the same color as the structure (distance between columns less than 10 cm)
Steel uprights painted the same color as the structure and horizontal strips in satin stainless steel

The HEIGHT ADJUSTMENT SYSTEM BETWEEN STEPS (RISE) allows you to reach the desired height between floors with more or fewer steps (this allows you to find the right compromise between ease of climbing and size of the staircase)

.

NUMBER STEPS	HEIGHT BETWEEN THE PLANS(H)
10 steps 1 box	Min. 204 cm Max. 244 cm (Max. 264cm)
11 steps 1 box	Min. 223 cm Max. 266 cm (Max. 288cm)
12 steps 1 box	Min. 241 cm Max. 289 cm (Max. 313cm)
13 steps 1 box + 1 step	Min. 260 cm Max. 311 cm (Max. 337cm)
14 steps 1 box+ 2 steps	Min. 278 cm Max. 334 cm (Max. 362cm)
15 steps 1 box + 3 steps	Min. 297 cm Max. 356 cm (Max. 386cm)
16 steps 1 box+ 4 steps	Min. 315cm Max. 379cm (Max. 411cm)
To reach greater heights add steps
H=Distance from the lower floor to the upper floor (floor included). Arrival step to the upper floor fixed to a riser under the floor of the upper floor Floor hole: staircase width + 5 cm

LADDER SUPPORTS

Ladders with a maximum of 13 steps: 1 ground support (included in the ladder box)
Ladders with 14, 15, 16, 17 and 18 steps: 1 ground support (included in the ladder box) + 1 ground or lateral support (to be purchased separately)
Ladders with 19, 20 and 21 steps: 1 ground support (included in the ladder box) + 2 ground or lateral supports (to be purchased separately)

On the following pages the measurements of the staircase (footprint) are displayed based on the number of steps and it is possible to determine the direction of ascent, entry and exit, the shape and minimum size of the opening in the floor.

STRAIGHT LINE

Rectilinear scale measurements
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

WITH 1 ROUND

Scale measurements with 1 turn
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

WITH 2 TURNS

Scale measurements with 2 turns
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

DIRECTION OF RISE

Hours

Counterclockwise

LAP POSITION

Down

Intermediate

Up

HOLE DIMENSIONS

If the hole exists: based on the height between the floors (H) to be connected, select from the possible staircase configurations the one compatible with the existing floor hole according to the diagram below.

If the hole still needs to be made: based on the height between the floors (H) to be connected, make the hole in the floor compatible with the configuration of the chosen staircase (straight, with one turn, with two turns) according to the diagram below.

HEIGHT BETWEEN THE PLANS (H)	DIMENSIONS OF THE SLOT HOLE (with slab thickness of 30 cm)
Min. 240 cm* - Max. 260	The floor hole must have at least the dimensions of the scale
Min. 260 cm - Max. 280	The floor hole must have at least the dimensions of the staircase minus 1 step down
Min. 280 cm - Max.305	The floor hole must have at least the dimensions of the staircase minus 2 steps at the bottom
Min. 305 cm - Max. 325	The floor hole must have at least the dimensions of the staircase minus 3 steps at the bottom
Greater than 325 cm	The floor hole must have at least the dimensions of the staircase minus 4 steps at the bottom
* less than 240 cm: The floor opening must have at least the dimensions of the staircase plus 1 step at the top of the staircase (bottom)
HOLE WIDTH: scale width + 5 cm.


White 22	Silver Gray 01	Anthracite Gray 03


Bleached 84	Natural 12	Walnut 25


Sand 27	Cement 89	Dove 87


Wenge 23	White Lacquered 94

1 box = 1 staircase complete with 12 steps Structure, Steps, Railing (internal side), Handrail

Choice between:
Straight staircase: 12 straight steps
Staircase with 1 turn: 9 straight steps + 3 round steps
Staircase with 2 turns: 6 straight steps + 6 round steps

Box measurements may vary

DESCRIPTION

The modular open staircase, designed by Giugiaro Architettura, which combines a solid steel structure with the possibility of installing an integrated LED lighting system.

MATERIALS

STEPS

In solid beech wood, 40 mm thick
Without knots and cracks, maximum stability and mechanical resistance thanks to Finger Joint technology
Non-toxic water-based paint: 3 layers of paint

HANDRAIL

In solid beech wood of the same color as the steps

STRUCTURE

Modular steel elements
Matt and scratch-resistant painting, baked with epoxy powders

RAILING (two models)

Vertical columns in painted steel in the same color as the structure (distance between columns less than 10 cm)
Steel uprights painted the same color as the structure and horizontal strips in satin stainless steel

HEIGHT

The HEIGHT ADJUSTMENT SYSTEM BETWEEN STEPS (RISE) allows you to reach the desired height between floors with more or fewer steps (this allows you to find the right compromise between ease of climbing and size of the staircase)

.

NUMBER STEPS	HEIGHT BETWEEN THE PLANS(H)
10 steps 1 box	Min. 204 cm Max. 244 cm (Max. 264cm)
11 steps 1 box	Min. 223 cm Max. 266 cm (Max. 288cm)
12 steps 1 box	Min. 241 cm Max. 289 cm (Max. 313cm)
13 steps 1 box + 1 step	Min. 260 cm Max. 311 cm (Max. 337cm)
14 steps 1 box+ 2 steps	Min. 278 cm Max. 334 cm (Max. 362cm)
15 steps 1 box + 3 steps	Min. 297 cm Max. 356 cm (Max. 386cm)
16 steps 1 box+ 4 steps	Min. 315cm Max. 379cm (Max. 411cm)
To reach greater heights add steps
H=Distance from the lower floor to the upper floor (floor included). Arrival step to the upper floor fixed to a riser under the floor of the upper floor Floor hole: staircase width + 5 cm

LADDER SUPPORTS

Ladders with a maximum of 13 steps: 1 ground support (included in the ladder box)
Ladders with 14, 15, 16, 17 and 18 steps: 1 ground support (included in the ladder box) + 1 ground or lateral support (to be purchased separately)
Ladders with 19, 20 and 21 steps: 1 ground support (included in the ladder box) + 2 ground or lateral supports (to be purchased separately)

CONFIGURATIONS

On the following pages the measurements of the staircase (footprint) are displayed based on the number of steps and it is possible to determine the direction of ascent, entry and exit, the shape and minimum size of the opening in the floor.

STRAIGHT LINE

Rectilinear scale measurements
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

WITH 1 ROUND

Scale measurements with 1 turn
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

WITH 2 TURNS

Scale measurements with 2 turns
- 10 steps
- 11 steps
- 12 steps
- 13 steps
- 14 steps

DIRECTION OF RISE

Hours

Counterclockwise

LAP POSITION

Down

Intermediate

Up

HOLE DIMENSIONS

If the hole exists: based on the height between the floors (H) to be connected, select from the possible staircase configurations the one compatible with the existing floor hole according to the diagram below.

If the hole still needs to be made: based on the height between the floors (H) to be connected, make the hole in the floor compatible with the configuration of the chosen staircase (straight, with one turn, with two turns) according to the diagram below.

HEIGHT BETWEEN THE PLANS (H)	DIMENSIONS OF THE SLOT HOLE (with slab thickness of 30 cm)
Min. 240 cm* - Max. 260	The floor hole must have at least the dimensions of the scale
Min. 260 cm - Max. 280	The floor hole must have at least the dimensions of the staircase minus 1 step down
Min. 280 cm - Max.305	The floor hole must have at least the dimensions of the staircase minus 2 steps at the bottom
Min. 305 cm - Max. 325	The floor hole must have at least the dimensions of the staircase minus 3 steps at the bottom
Greater than 325 cm	The floor hole must have at least the dimensions of the staircase minus 4 steps at the bottom
* less than 240 cm: The floor opening must have at least the dimensions of the staircase plus 1 step at the top of the staircase (bottom)
HOLE WIDTH: scale width + 5 cm.

STRUCTURE AND RAILING COLORS - STEEL


White 22	Silver Gray 01	Anthracite Gray 03

COLORS OF STEPS AND HANDRAILS - WOOD


Bleached 84	Natural 12	Walnut 25


Sand 27	Cement 89	Dove 87


Wenge 23	White Lacquered 94

PACKAGING

1 box = 1 staircase complete with 12 steps Structure, Steps, Railing (internal side), Handrail

Choice between:
Straight staircase: 12 straight steps
Staircase with 1 turn: 9 straight steps + 3 round steps
Staircase with 2 turns: 6 straight steps + 6 round steps

Box measurements may vary

materiali ok, istruzioni scarse, errori dimensionali

Cosa mi è piaciuto: risultato estetico piacevole, adattabilità/modularità delle scale
Cosa non mi è piaciuto:
- Arrivati 4 pallet con nessuna istruzione esterna su come identificare le 3 scale e relativi accessori. Ho dovuto sballare tutto e investire un paio d’ore per orientarmi
- Istruzioni allegate troppo generiche, nessun codice articolo citato nelle istruzioni, occorre andare “ad intuizione” nell’individuare i componenti tra le centinaia presenti.
- Poco dopo l’inizio del montaggio della prima scala noto incongruenza tra un supporto a parete e relative istruzioni. Tento di contattare il vostro servizio assistenza (che dovrebbe essere in “tempo reale”) e ricevo conferma che le istruzioni sono errate, solo dopo 2 giorni…Inaccettabile dover sospendere il montaggio per 2 giorni in attesa di vostre risposte!
- I tasselli a muro che fornite sono chiaramente indicati solo per pareti in cemento pieno e non per muri in mattoni, ma ciò non è indicato da nessuna parte, ciò ha creato molti problemi, diversi tentativi con relativi danni ai muri (fori da richiudere e spostamento dei sostegni)
- Ringhiera: l’unione di due colonne sovrapposte (quelle del ventaglio) è impossibile da eseguire con l’inserto che fornite in quanto il suo diametro va in netta interferenza con quello interno delle colonne. L’unico modo è smerigliare la superficie di entrambi i lati dell’inserto in modo da ridurne il diametro. Ciò non è indicato in nessuna istruzione.

Scala modularis 95

5 stelle ! Ottimo prodotto , ottima assistenza .grazie Rintal

Ho acquistato una scala rintal e sono…

Ho acquistato una scala rintal e sono rimasto molto soddisfatto per tutto.
Personale cortese competente e disponibilissimo anche nella risposta alle mail. Scala arrivata nel giro di 10 giorni dall'ordine. Ottima esperienza...da consigliare assolutamente

TRUSTPILOT - Data Esperienza: 16/10/2022

Très bonne qualité

Je suis totalement satisfait de l’escalier.
J’ai commandé en passant par le site rintal shop, j’ai pu obtenir les renseignements et le service par le tchat en ligne. La personne est très compétente et disponible.
J’ai reçu l’escalier et l’emballage est de bonne qualité.
Encore merci pour votre service, disponibilité et pour la qualité.
À bientôt pour une autre commande

Ottimo

Ottimo acquisto! Rapporto qualità prezzo eccellente

View all reviews

FAQ

Name: Modularis 65CM - Wengé 23
Brand: rintal
SKU: KNI65XX12WTUW23
Price: 1524.0 CHF
Availability: InStock

Is Modularis available in different sizes?

Yes, Modularis is available in 4 sizes, in the 65cm , 75cm , 85cm or 95cm version.

Does Modularis require ground/lateral supports?

Ladders with up to 13 steps require ground support (included in the ladder box)
Ladders with 14 to 18 steps 1 ground support (included in the ladder box) + 1 ground or lateral support (to be purchased separately from the accessories section)
Ladders with 19 to 21 steps: 1 ground support (included in the ladder box) + 2 ground or lateral supports (to be purchased separately from the accessories section)

Where can I place the lateral support?

The lateral support can be positioned under each straight step or under the last step of the turn . A load-bearing wall is recommended for fixing the lateral support.

Can I replace the ground support with a lateral support during assembly?

Yes, it is possible to do this by purchasing it separately (from the accessories section) and positioning it adjacent to the position of the ground support (but not in the first two steps of the ride)

did you not find the answer you were looking for? Ask your question

t